Here’s an RV hookups for beginners guide to better prepare you for your first RV trip…
Jennifer and I have been doing this for a long time. So, sometimes I take for granted some of the beginner’s tasks that are now second nature to me. RV hookups being one of those things.
I realized I should take a step back and cover some basics that RV beginners need to know. And what better way to start than how to connect full hookups on your first stay at a campground?
As a first time RVer, you’re probably wondering what steps you need to take and in what order to do them. So, I’m going to share the “general rules” and my best tips the new RVers need to know.
We use affiliate links and may receive a small commission on purchases at no added cost to you. Thank you for your support. You can read our full affiliate disclosure here.
RV Hookups for Beginners (How to Set Up Your RV)
Like what you see in these videos? We’d appreciate it if you would Subscribe to our YouTube Channel (easy to do right here) and consider “ringing the bell icon” to be notified of any new video from us. 🙂 Thanks!
Not too long ago, Jennifer and I made the above video on how to set up your RV at a campground. It covers everything from choosing a site to what to hook up and in what order. It’s a great visual guide on what you need to do from start to finish.
For the purpose of this article, however, I’m going to focus only on RV hookups for beginners. These steps and tips are the same whether you drive a motorhome, travel trailer, fifth wheel, or any camper. Hookups are essentially the same wherever you camp, whether it’s an RV park, state parks, national parks, or any other place that offers hookups.
Step 1: Set Your Parking Brake
The most important thing to do before you even start hooking up is set your parking brake! Experienced RVers can share plenty of stories where either they or someone else forgot to do this with disastrous (& sometimes funny) results.
The last thing you want is for your RV to “settle” and shift back or forth, putting tension on your cables. Or, worse, roll off and pull out the cables and do costly damage to the campground’s panels and connection points.
So, don’t repeat the dumbest RV camping mistakes, and set your parking brake!
Step 2: Electric Hookup
The first thing I recommend connecting is your electric hookup. The main reason is so you can start running your air conditioning, heater, fridge, etc. on the power source from your RV campsite instead of from your RV’s power supply.
There are usually 3 different plugs on a campsite’s electric panel: 20 amp, 30 amp, and 50 amp. Bigger RVs usually use 50 amp and smaller RVs usually use 30 amp. You should know which kind of amp service your RV runs off of. But, if you don’t, the plugs have differently shaped prongs, so you should only be able to plug into the correct one.
Once you’re plugged in, you flip the breaker switch corresponding to the amp service you need. For instance, you flip the 30 amp breaker after you plug in your 30 amp plug. Then you plug in the other end to your RV, giving it a twist and rotating the collar until it’s snug.
BUT BEFORE YOU PLUG IN, here is one of the best RV tips I can give you…
PRO TIP: Always Use a Surge Protector
Always use a surge protector when connecting your RV to power! A lot of people have learned the hard way that campground electrical panels are not always well-maintained or wired properly. They can cause a power surge that can badly damage your electrical system.
Some RVs have built-in surge protectors, but if yours doesn’t, I can recommend 30 Amp Surge Guard or 50 Amp Surge Guard. You can get 5% off either of those surge protectors (or any TechnoRV products) with the coupon code RVLIFESTYLE5.
Plug this portable surge protector into the campground’s electric power supply, and then plug your power cable into the surge protector.
Electrical Hookup Adapters
Not every campground provides multiple amp services. Some may only have electrical hookups for 30 amps or 50 amps. That’s why it’s a good idea to keep an RV plug adaptor in your RV, like this Dogbone adapter for 50 amp male to 30 amp female.
Perfect Fall long-sleeved shirt for the RV Lifestyle. Soft and comfortable for your RVing adventures!
Step 3: Water Hookup
The next hookup on the list is connecting your water hose to the campground’s water source. Just like we recommend a surge protector with electrical hookups, we recommend you always use a water filter connected to your fresh water tank.
We use a relatively new system called Clear20 that consists of an inline water filter and the Dirtguard pre-filter that takes out the sediment and particulates before they go through the inline filter. Or, there is a cheaper Clear2o RV water filter system that uses solid charcoal to filter.
To easily connect your water hose, I recommend getting a Fresh water quick disconnect. It’s much easier than threading hoses by hand and helps minimize water waste from annoying little leaks. The quick connect snaps right on and off. Couldn’t be easier.
Connect the filter to the campsite’s water spigot, then connect your fresh water hose to the water filter. Then, using the quick connect, connect the other end of the water hose to your RV.
Step 4: Cable Hookups
If your campground offers cable TV, you can now connect it to your RV. There’s nothing special to know here. Simply plug in the cable cord to your RV. If you don’t know where your cable port is, consult your owner’s manual.
Step 4: Sewer Hookups
Lastly, it’s time to do your sewer connection. Not all campsites have sewer connections, so this might not be something you do until you dump your black tank at RV dump stations.
Whether you’re connecting at a campsite or the dump station, the process is basically the same. The only difference is how long you leave it connected.
Now, let me warn you, dealing with your black water tank is one of the biggest downsides of RVing. It’s just gross. But it needs to be done and is well worth the stinky effort in the end.
That said, I suggest you put on rubber gloves before you connect your sewer line, or what the RV world likes to call the “stinky slinky.” Make sure your gray tank and black tank are closed, then grab your sewer hose.
Connect the end of the hose with the twist-on connector to your RV drain spout. Then run the hose the sewer drain. It’s usually easiest to run your sewer hose support as you go. This support helps direct the hose (and its contents) toward the drain.
Now, attach the end of the hose with the elbow connection to the sewer drain. Screw it into position if the sewer drain also has threads (not all do.)
You might also want to review this post from the RV Proctologist!
Do NOT Leave Your Black Tank Valve Open When Hooked Up
This is a mistake that a lot of new RVers make. They understandably think that if they’re connected, they might as well leave their blank tank valve open so it can continuously drain. Less poo stored in your RV, the better, right? Wrong!
If you leave your black tank valve open while you’re hooked up, it will cause gross and sometimes expensive problems. The most common of which has its own inelegant RV terminology: the poop pyramid.
This happens when liquid waste easily drains out when your valve is left open but solid waste builds up in your tank. Like I said, it’s gross. And stinky. And can be expensive to clean out.
So, don’t leave your black tank valve open!
Get the Home Study Course today and worry about the road, not the repairs!
Every time you move your RV it’s like driving through a hurricane during an earthquake. Parts break and many items need to be maintained, this program will show you how you can save time and money by gaining the confidence to take on the majority of the issues you’ll come across. Don’t get caught with your RV in the shop! Learn how you can maintain and repair your RV at your own pace and at the most convenient time for you! This course is produced by the National RV Training Academy.
Looking for exciting RV trip ideas and travel suggestions?
We’ve written a library of RV Travel books that lay out guided RV explorations of scenic areas of the US that we’’ve explored and think would make an excellent RV trip for you.
In each location, we provide a suggested route and itinerary (7 stops in each guide, one for each day of a week trip!) as well as links to multiple campgrounds and boondocking spots, local tips, and interesting things to do at each location.
You can hit everything in seven days, do a whirlwind weekend tour, or you can take your time and explore the area over a 2+ week period.
Planning an RV trip can be very time-consuming so that’s why we’ve done the research for you! Just take our guides and use them. We’re sure you’ll have an RV trip for the ages! Instant download. CLICK HERE for information on our RV Travel Guides